Copyright 2013 James Marsh
Gear, Tackle and Flies for the Kalama River Washington
The fly line we recommend for salmon fishing the Kalama River should be either an 9 or 10
weight, floating fly line. The fly line we recommend for steelhead fishing should be a 7 or 8
weight, floating fly line. If you prefer to use a Spey rod, then the line should probably be a 9
weight line made for Spey fishing. For sea Run Cutts, we prefer a floating 5 or 6 weight line.
Fly Line Weight:
Adding weight to your fly line is dependant on the flow and depth of the pools you are
fishing. You can add a sink tip line or split shot.
The fly rod we recommend for salmon fishing should be an 9 or 10 weight, in a nine foot
length. It is probably best in a medium fast to fast action.
The fly rod we recommend for steelhead fishing is a 7 or 8 weight in a nine foot length. It is
probably best in a medium fast to fast action.
If you prefer to use a Spey Rod, then we suggest a 9 weight, 14 foot length rod. It should be
a medium to fast action rod. The five or six weight rod for sea-run cutts should be a fast
action or medium fast action, nine foot rod.
You want a stiff, hard leader material like our Perfect Fly leaders. The size should range
from a minimum of ten pound test up to twelve pound test. They should be nine to fifteen
feet long for a regular fly rod and from ten and a half to fifteen feet for two handed Spey
rods. If you use a sinking fly line, you would want them only about four to six feet long. We
have hand-tied Perfect Fly steelhead leaders. We recommend a 71/2 to 9 foot leader for the
sea-run cutts in 0X to 5X sizes.
You want to carry plenty of extra tippet material for ten to twelve pound test. It too should be
hard, stiff material that is abrasive resistance. For the sea-run cutts, 0X to 5X tippet.
Unless you want to fish from the banks in the few areas it is practical, then waders are
necessary. We suggest them even if you fish from a drift boat.
The wading boots you use are very important. Both cleats and rubber/felt bottoms are used.
A landing net is recommended. The main requirement is that the net should be very large.
The net area should be at least 15 inches wide by 20 inches long. The overall length is
usually around 32 inches. You can use a smaller net for the sea-run cutts.
We have a complete line of flies for steelhead and salmon. We have selected them as the
most popular flies from thousands of patterns that have been developed over the years. We
have some of our own Perfect Fly steelhead and salmon patterns. They imitate the
hexigenia mayfly nymph, certain caddisfly nymphs, stonefly nymphs and fish roe or eggs
that are found in the river throughout the year. We also have a full line of popular wet flies,
egg flies, Spey flies that are very popular.
We also have a complete line of trout flies for the sea-run cutthroat trout that visit the
Free Shipping Continental U. S.
100% Satisfaction Guaranteed
Recommended Tackle & Gear
7, 8 , 9 or 10 weight for appropriate type
rod, sinking, sinking tip and floating,
floating 5 or 6 weight fly line for cutts
10#, 12# in 9 to 15 feet lengths, 0X-5X in
71/2 to 9 foot lengths for cutts.
10# and 12# / 0X to 5X for cutts
Best Fly Rods:
Perfect Fly 7, 8, 9 and 10 ft. single hand
rods, and 5 or 6 weight rods for cutts
For 7 to 10 weight lines, or for 4 to 5
weight lines for cutts
Fly Floatants and Misc Items:
KISS Strike Indicators, Lanyards, etc.
Tools & Accessories:
Nippers, forceps, retractors, etc.
Copyright 2015 James Marsh
|Options For Selecting Flies:
1. Email us (firstname.lastname@example.org)
with the dates you will be fishing this
stream and we will send you a list of our
fly suggestions. Please allow up to 24
hours for a response.
2. Call us 800-594-4726 and we will help
you decide which flies you need.
3. Email us (email@example.com)
with a budget for flies and we will select
them to match the budget and get them to
you in time for your fly fishing trip.
All orders are shipped free in the
U. S. Orders over $50 are shipped via